NZ25 Wood Burning Zero Clearance and Masonry Fireplace
PDF Manual

Features
  • Air wash insulated with ceramic fiber and protected with stainless steel cover plate eliminates deterioration and assures complete combustion, maintaining an extremely clean viewing glass.
  • Stainless steel log retainer and primary "bottom air feed" assists in cold start up and to "recharge" a small, dying fire.
  • Uses outside or inside combustion air.
  • Full brick patterned refractory liner retains heat and supports overnight burns.
  • Two stainless steel secondary air tubes generate a fascinating display of "YELLOW DANCING FLAMESŪ".
  • An "afterburner" just above the baffle using primary air promotes secondary combustion and clean burn.
  • Large "king size" functional ash pan with folding lid and dual carrying handles.
  • Cast iron grate with self closing ash dump.
  • Single lever combustion control with optional motorized thermostat allows for automatic regulation of burn rate
  • President's Limited Lifetime Warranty

Accessories

    • Blower kit - one or two blowers may be installed
    • Electric wall thermostat to control burn rate
    • Hot air gravity vent system
    • Central heating blower
    • Outside combustion air kit
    • Hot air vent louvre - in polished brass or black
    • Attractive polished brass, black or 24 Karat gold plated louvers available.
    • Arched door in 24 Karat gold plated or traditional painted black
    • Webbed arched door in traditional painted black

NZ25

Shown with webbed arched 24 karat
gold plated door and louvres


Shown with webbed arched black
door and black louvres



Specifications
NZ25
Outside dimensions 383/4W x 401/2H x 251/2D (includes standoffs)
Firebox chamber 22W x 15H x 13D
Weight
326 LB
Firebox capacity 2.38 cu. ft.
Approx. area Heated* 2000 sq. ft.
Heat Output BTU/h
(high burn)**
60,000
Burn Time (low fire)* 8 hours
Outside combustion air yes
R-2000 approved (Canada) yes
Max. log size 18"
Flue size-prefabricated 7"
Flue size-masonry 8", 8" sq., 8 x 12 flue tile
Catalytic combustor no
  • *Figures may vary with individual conditions
  • **Wolf Steel Ltd own test showing realistic BTU using hardwood logs with regular refueling. Heat output will differ depending on chimney draft as well as type, moisture content and size of wood
  • Install as a zero clearance fireplace with factory-built chimney or as a masonry fireplace using an existing or new masonry chimney.

Line dimensions are to be used as a guide only. Please consult your installation manual
for updated and precise measurements before proceeding to install or frame your Napoleon Fireplaces.

Back to Wood Burning Products