1100C EPA Woodburning Cast Iron Stove
 PDF Manual

Features
  • EPA (Environmental Protection Agency) approved with emissions as low as 4.1 grams per hour and 69.8% overall maximum heating efficiency - more heat with less fuel.
  • The easy operation of a single lever burn control regulates primary and secondary air establishing a perfect mixture and providing a clean burn
  • Available in a rich porcelain majolica green or brown, or traditional painted black
  • Primary "bottom air feed" assists in cold start ups and to revive a small, dying fire
  • Large viewing area through an elegantly arched Early American cast iron door
  • High heat ceramic glass provides a safe, unobstructed view of the fire
  • Effective air wash in combination with high temperatures keeps the viewing glass clean
  • Fully refractory lined firebox, similar to a kiln maintains the interior temperatures necessary to achieve low emissions
  • Ash dump with self closing door is readily accessible.
  • Concealed hinges
  • President's Limited Lifetime Warranty
Accessories
    • Variable speed blower
    • Thermostatic sensor control
    • Blower guard


1100C
1100C shown in porcelain enamel majolica green


Specifications
 1100C
Emissions (grams per hour) 4.1
Width x Height x Depth (inches) 25 1/2 x 33 1/4 x 22 1/2
Firebox Chamber (inches) 13 1/2w x 18h x 12d
Firebox Capacity 1.7 cu. ft.
Door size (height x width) 14 3/4 x 19 3/8
Weight without bricks 252
Weight of Bricks 90 lbs
Approx. area Heated* 600-1,500
Heat output BTU/h** 11,700-42,200
Heat Output BTU/h (high burn)*** 55,000
Burn Time (low fire)* 7 hours
Catalytic combustor no
Mobile home approved no
R-2000 approved (Canada) yes
Max. log size 18"
Outside combustion air no
Flue diameter 6"
Flue size-prefabricated 6"
Minimum Clearances
Single Wall Chimney Connector from Stove to Combustibles Double Wall Pipe from Stove to Combustibles
Rear 10" Rear 6"
Side 12" Side 10"
Corner 6" Corner 2"
All stove clearances may be reduced
with shielding acceptable to local authorities
*Figures may vary with individual conditions - please consult your specialty dealer
 **EPA (Environmental Protection Agency) rated BTU/HR with softwood test fuel (for emissions testing only) - no refueling   
***Wolf Steel Ltd. own test results showing realistic BTU using hardwood logs with regular refueling. Heat output will differ depending on chimney draft as well as type, moisture content and size of wood.

Outstanding Performance


  
 1.
Economical 6" flue assures you of efficiency and cost saving installations
8.
 Fully refractory lined firebox, maintains the interior temperatures necessary for low emissions

2.
 Primary, bottom air feed assists in cold start ups and to revive a dying fire
9.
 Ash dump with self closing door is readily accessible (pedestal & cast iron model)

3.
 Secondary air tube insulated with ceramic fiber and protected with a stainless steel cover plate ensures complete combustion
10.
 Large ash pan with 2 carrying handles for convenient disposal of ashes (pedestal model)

4.
 Wrap around side shields disperse heat evenly, reducing clearances to combustibles
11.
 Folding ash pan lid allows for clean, no-mess ash removal


5.
 Large viewing area through an elegantly arched cast iron door
12.
 Cool room air is circulated around the firebox, heated and returned to the room

6.
 High heat ceramic glass provides a safe, unobstructed view of the fire
13.
 The single lever burn control regulates primary and secondary air establishing a perfect mix and a clean burn

7.
 Effective air wash combined with high temperatures keeps the viewing glass clean



NAPOLEON STOVES ARE CERTIFIED FOR EMISSIONS TO EPA PHASE 2 1990
STANDARDS AND SAFETY TESTED TO NORTH AMERICAN STANDARDS
The measurements are to be used as a guide only. Please consult your installation manual
for updated and precise measurements before proceeding to install your Napoleon stove.

Back to Wood Burning Products